Pages

Monday, February 28, 2011

Burlap Pegboard - The details

Thank you all sooo much for your lovely comments on my Burlap Pegboard. I used it for the first time today and it is so convenient. 

Well as promised here are some details. I am sad to admit I didn't take any pictures of the assembly of the pegboard. I believe I had some errands to run while my amazing hubby assembled it. But I can tell you basically what he did.  We took a trip to Home Depot where we found the pegboard in the lumber section. We bought 2 sheets? pieces? boards? As far as I could tell they only had the one size which was 24" by 48".  They were pretty cheap. About 5-ish bucks each. They were finished on one side, almost a white, melamine type finish. Hubby picked up some 1inch thick by 2inch wide boards. Ok.. I obviously don't know much about the woodworking part of things but I REALLLLLY love powertools and need to learn soon. I tell ya what. I am going to give you a great link with pictures. This article at DIY Network is basically what he did. Brandon (hubby) actually only framed it out in an "H" shape, and screwed the pegboard onto the frame. Then I held it for him as he screwed it into the anchors he had put in the wall. It was very light by the way. Use studs if you can though. Unfortunately we couldn't so we had to use wall anchors. Ugh! Are you bored yet?    oooh look a picture! Those are just the dowel rods sitting there ready to be used.
This is what we had once we hung it up. The boards were 2 different shades of white :( 
Brandon had to cut about a foot off of each board. The extras I used in my craft closet and made a  mini board... awe look how cute! I still have to "decorate" it. That is for another post. You can see in this pic the peg holes underneath.
While I was in Home Depot I tried to think of what I would use to hold my dowel rods. I didn't see anything in the pegboard accessory section, and I was looking for those big cup hooks you can get that are coated with a rubbery layer. I figured it would help grip the rods. For some reason I couldn't find them but I did find some Eye Hooks.  I found a size that would screw somewhat snugly into the peg hole.

And then! I dipped them in Plasti-Dip! This stuff is so much fun. I have always wanted to try it out and so I thought this would be the perfect opportunity to use it since I couldn't find my plastic coated cup hooks. I found the Plasti Dip in the spraypaint section at Lowes.
 I wrapped a piece of jewelry wire around each one to dip them in the Plasti Dip and hung them to dry. They dry quickly. This gave them a great non slip finish. While I was at it I dipped some pliers handles, a hook, some clamp handles... I had lots of fun plasticizing everything.
These hooks are a tiny bit too long, but I wasn't worried about them going slightly into the wall in the back since I don't intent to ever take it down.
Next, I basically just cut my burlap bigger than the board. Oh, I got my burlap at Hobby Lobby. Cheap, fabulous, burlap. I was able to use my electric staple gun on the sides of the board where the frame was... well only on one side because my gun wouldn't fit on the side next to the wall. The glue gun came in handy there. 
Because we only framed it out in an "H" shape, I didn't have any thing to staple the burlap to on the top and bottom. I tried stapling to the pegboard and it just laughed at me. I suppose I could have used the glue gun on that part too, but for some reason I decided to use this awesome tape I found at Michaels.
 This junk is amazing. I just cut strips, pressed it to the fabric, peeled off the backing, pulled the fabric tight and pressed in place on the back side of the pegboard. Its terrifically strong tape.
 
Remember to pull the fabric tight as you staple then tape. The side I had to hot glue is kinda loose, but that glue was wicked hot. I burned the mess out of my finger (that's southern for crap). After that was all done I nailed and glued in some furniture nails. Got a few packs of these for really cheap at Lowes ($1.24 each). They had several colors but I liked the bronze ones best.
I was able to nail them along the sides but had to glue them to the top and bottoms. Use pliers if you can. The metal also gets quite hot. I started in the corners and then the middle and then about 2 in between those. Just make it look pretty and somewhat evenly spaced. I bought 4 packs of the nails for both boards and still have some left over.
So on to the accessories! I started out on the bottom with my paper. I screwed in the screw eyes and left 2 empty peg holes between the screws for spacing. This would give enough room for bigger rolls too.  I got my dowel rods from Michaels and I didn't cut them. They were the perfect length for me.
I found this stuff in my husbands craputer room. Its basically a double sided velcro. It worked nicely to keep my paper rolls from unrolling. Though I think it may be fine without it.
                               

The white baskets I hung with some "L" shaped hooks that came in a multi-pack, pegboard accessories kit. The bags are hung on a pegboard rod. Its just a little rod that is about 7 inches long. I dipped that in the plastic stuff too... because it was so much fun. The scissors are resting in another accessory kit item that is probably used for pliers. It was really late at night and I wanted to get the board done so when I came to the shirt boxes I just used what I could find. I decided to cut some strips of burlap and make loops to hold them in. And sewed on a button for cuteness.
These I impaled on some more accessory hooks.
All I was left with was the tissue paper. After some thinking I decided to use a plastic skirt hanger I had and just clipped them, then hung them on another screw hook that I screwed in just behind the gift bags. 
I guess thats about it. Thank you for reading my book. I hope you enjoyed it. I know I didnt. I am so glad this post is over. 
The end.
I'd be happy to answer any questions that I can. 
 

Saturday, February 26, 2011

Burlap Pegboard, Ballard Knock-off

 I am so stinkin excited about this project!  So, I had my husband hang some pegboard for me in my laundry room because I wanted a place to hang my wrapping paper and supplies. Now, I HATE painting, but love what paint can do. Still, I soooo did not want to paint! Not wanting to have the ugly look of pegboard either I thought and thought of what I should do. I first thought of breakin' out the Mod Podge and fabric, then I came across this in my Ballard Designs Magazine.

 I thought... YES! I can make my pegboard look like that! Its not a corkboard but its the same idea. Though I couldn't find anyone online that had done it, I knew it could be done. I have hot glue, an electric staple gun, and I know I can get those nail heads at Home Depot or Lowes.  Plus, everyone seems to be doing something in burlap and I want to join in on the fun. Burlap is cheap and sturdy and... I love it! The weave of burlap is so loose that I wouldn't have to cut holes for the pegs and I could sort of see through it so it was easy to find the peg holes. 
Here is what I came up with.

Here is what it would have looked like without the burlap and nail heads. Ooooh look! It matches the baskets on the shelf! But oh-so-ugly!

 And this is what it looks like with all the paper, bags, etc. all hung up. eeeeee! I LOVE it!
I just walk in there and stare at it. It makes me so happy!


                                Before                                                                    After
The chest freezer underneath makes a perfect place to wrap presents.
I will show you some more details and how-to's in another post.

Update : Here is my post about the details of making this.











 linking up:
Visit thecsiproject.com


UndertheTableandDreaming










Funky Junk's Saturday Nite Special


Along For the Ride


























The DIY Show Off


SEW DARN CRAFTY






































Friday, February 25, 2011

I got it!

A few days ago I got my free, autographed book !
Eeeeeeee! I am so excited!  


 And here it is sitting on the shelf with my other Mary Connealy books
Unfortunately I don't have the first two in the series so I haven't read it yet :( 
Soon though!


Foto Friday

Not sure why but I love this. It is a photo of my daughter eating breakfast before school (pre-homeschooling).  - 2007



Tuesday, February 22, 2011

Curtain Tie-backs

When I finally switched out the temporary curtains in my bedroom ( which were hemmed, king size, clearance sheets) I had to add another tieback to each window. Now the ones I had in there were great, but there was only one per window and I liked the look of two. 

The lamp is not a suitable tieback.


I had an idea to look around Home Depot's wood section and see if I could find some wood post toppers, table feet.. something that would do as a cheap alternative to the pricey tiebacks at the store. Thats when I came across these curtain finials on a clearance rack.

A few coats of brown hammered metal looking spray paint and this is what I came up with.

Ok... the pic makes them look silver, but they were more bronze. I had never used this hammered metal spray paint before, but I love the look!

ahhh. much better.

I just screwed them right into the wall. It already had a long screw in the back. Probably should have used an anchor, but so far its holding up nicely.



Here is a before of the room with the old red curtains sheets. 


Then the after with new tiebacks and curtains.